Resultados 1 al 6 de 6

Tema: satellite page explanation/information needed

  1. #1
    Fecha de ingreso
    31 May, 09
    Ubicación
    Vienna/AUSTRIA
    Mensajes
    286

    Predeterminado satellite page explanation/information needed

    both screenshots are outdoor pics (version 2.0.2).

    Which bar (showing the signal strength) belongs to which satellite?
    I am not sure but i think in the previous version was an additional information (showing the sat-number for each bar).



    Connected with only 2 satellites? How does it work?

  2. #2
    Fecha de ingreso
    05 Aug, 09
    Ubicación
    Australia
    Mensajes
    49

    Predeterminado

    Hi freeday - I think the highlighted satellite numbers are the ones for which there is no signal...not the ones that are connected. So in the example you show there are actually 6 satellites connected ..and two are not.

    Cheers
    Greg

  3. #3
    Fecha de ingreso
    16 Sep, 07
    Ubicación
    Jena, Germany
    Mensajes
    180

    Predeterminado

    Hello Greg

    Cita Iniciado por The Explorer Ver mensaje
    Hi freeday - I think the highlighted satellite numbers are the ones for which there is no signal...not the ones that are connected. So in the example you show there are actually 6 satellites connected ..and two are not.
    The pictures display a issue. The signal strength is missing in the left respectively right hand of signal bars.

    On my device with the version 2.0.2 and the current OS will display the signal strength fine. The core question is, why can freeday not show signal strength besides the signal bars.

    The signal strength coming from the $GPGSV sentence of the NEMA 183 stream from the GPS receiver. In this reason, a question to Freeday: Have you a safe GPS fix? Use you a the current OS and TwoNav versions? If yes in both cases, then the programmer have to hunt a bug with unknown reason.

    Have everyone a idea for a factory reset for the GPS receiver?

    greetings Joern Weber

  4. #4
    Fecha de ingreso
    10 May, 09
    Mensajes
    24

    Predeterminado Screen is screwed up

    Hi Freeday,

    I'm using as well firmware 2.0.2 and my satellite screen looks ok and includes the satellite numbers:



    As I see you rotated your screen 90° - did you try to rotate back to the original upright position? If this fixes the issue it's a bug in the display routines - if not: Did the upgrade on 2.0.2 work out without any flaws?

    Best regards,
    Thomas
    Imágenes adjuntadas Imágenes adjuntadas

  5. #5
    Fecha de ingreso
    31 May, 09
    Ubicación
    Vienna/AUSTRIA
    Mensajes
    286

    Predeterminado

    Thanks @all for feedback.
    @Joern:
    >>Have you a safe GPS fix? Use you a the current OS and TwoNav versions?
    YES & YES

    I resetted the aventura with the pencil
    Missing the satellite-number beside the bar is a screen rotation bug. i will write a ticket to compe.

    The second problem did not arrive one more time until now
    Última edición por freeday; 11/10/2009 a las 19:31

  6. #6
    Fecha de ingreso
    31 May, 09
    Ubicación
    Vienna/AUSTRIA
    Mensajes
    286

    Predeterminado

    Cita Iniciado por The Explorer Ver mensaje
    Hi freeday - I think the highlighted satellite numbers are the ones for which there is no signal...not the ones that are connected. So in the example you show there are actually 6 satellites connected ..and two are not.

    Cheers
    Greg
    Yes you are right.
    It is different to garmin.
    On the garmin view, the blue one have connection.
    On the aventura view, the blue one have no connection.

    Thanks for correction.
    It is a pity, that there is not the same system.

Permisos de publicación

  • No puedes crear nuevos temas
  • No puedes responder temas
  • No puedes subir archivos adjuntos
  • No puedes editar tus mensajes
  •  


About us

    CompeGPS Team SL All rights reserved © 2012

Follow us on

Twitter Facebook youtube Google Plus Flickr